KP15 DANFOSS PRESSURE CONTROLLER

Main features1. Pressure adjustment range:Left side (low pressure side): -0.20 bar to 7.50 bar (6 inHg to 108 psig).Right side (high pressure side): 8.00 bar to 32.00 bar (116 psig to 464 psig).2. Pressure difference adjustment range:Left side: 0.70 bar to 4.00 bar (10 psi to 58 psi).Right side: 4.00 bar (58 psi).3. Reset function:Left side (low pressure side): automatic reset.Right side (high pressure side): manual reset.Contact function: single pole double throw (SPDT) + single pole single throw (NO).Contact rating: AC15=10 A, 400 V.Ambient temperature range: -40°C to 65°C (-40°F to 149°F).Protection level: IP30.Pressure Connections:Type: Welding joint (ODF) or flare nut.Size: 1/4 in.

变体

KP15 丹佛斯压力控制器

类别: PRESSURE CONTROL

产品描述

1. Product Overview
KP15 is a pressure controller produced by Danfoss. It is widely used in refrigeration and air conditioning systems to avoid too low suction pressure and too high exhaust pressure. At the same time, it can also be used to control the start and stop of refrigeration compressors and fans with air-cooled condensers.

2. Product Features
Compact structure: The KP15 pressure controller is compact in design and easy to install and use.
High reliability: The vibration time is very short, which reduces wear and improves the reliability of the controller. At the same time, the fully welded bellows design also enhances its durability.
Convenient manual control: The electrical contact function test can be carried out without the help of any tools, and the operation is simple.
High protection level: The housing with protection level of IP30 and IP44 can be configured, which is suitable for different environmental conditions.
Wide application: It can be used for fluorinated refrigerants and ammonia refrigeration systems to meet different refrigeration needs.

3. Technical parameters
Ambient temperature: -40℃～+65℃ (can work for two hours at +80℃).
Working pressure: low pressure (LP) is 17bar, high pressure (HP) is 32bar (high pressure of KP6 model is 46.5bar).
Test pressure: low pressure (LP) is 20bar, high pressure (HP) is 35bar (test pressure of KP6 model is 46.5bar).
Contact load: AC1 is 16A, 400V; AC3 is 16A, 400V; AC15 is 10A, 400V. DC13 is 12W, 220V controllable current.
Wire interface: can be used for wires with a diameter of 6 to 14mm.

4. Reset mode and switch form
Reset mode: manual reset for high pressure, automatic reset for low pressure.
Switch form: with single-pole double-throw (SPDT) conversion switch, the action point is determined according to the set value of the pressure controller and the pressure at the interface.

Guangzhou Baida Refrigeration Equipment Co., Ltd

看过这一点的人也被查看过

KP2 DANFOSS PRESSURE CONTROLLER

KP15 DANFOSS PRESSURE CONTROLLER

KP36 DANFOSS PRESSURE CONTROLLER

KP35 DANFOSS PRESSURE CONTROLLER

KP5 DANFOSS PRESSURE CONTROLLER

KP1 DANFOSS PRESSURE CONTROLLER

HONGSEN PRESSURE CONTROL HS-P830

压力传感器

压力传感器应用：适用于制冷系统、液压系统、气动系统、汽车、医疗设备等。主要特点：高精度测量：可精确测量气体或液体的压力，确保系统的精确控制。可靠性：采用优质材料和精密制造工艺，确保传感器能够在各种环境中稳定工作。耐用性：具有良好的耐腐蚀性和耐磨性，延长了使用寿命。易于安装：设计紧凑，易于安装，适用于各种系统。多种输出选项：提供多种输出信号选择，如模拟信号（如0-5V、0-10V、4-20mA等）和数字信号。

油差压力开关

主要特点：高精度监测：可准确监测系统内的油压差，确保系统稳定运行。可靠性：采用优质材料和精密制造工艺，确保开关能够在各种环境中稳定工作。易于安装：紧凑的设计和易于安装适用于各种系统。耐用性：具有良好的耐腐蚀性和耐磨性，延长了使用寿命。安全性：具有过载保护功能，防止因压力过大或过低而损坏系统。手动复位：具有手动复位功能，简化作和维护。

双压力开关

1、主要特点：精度高：能精确监测和控制系统中的两个不同压力点，保证系统稳定运行。可靠性：采用优质材料和精密制造工艺，确保开关能够在各种环境中稳定工作。易于安装：设计紧凑，易于安装，适用于各种系统。耐用性：具有良好的耐腐蚀性和耐磨性，延长了使用寿命。安全性：具有过载保护功能，防止因压力过大或过低而损坏系统。自动复位：具有自动复位功能，简化作和维护。安全注意事项：电气安全：确保开关的接线符合电气安全标准，以免触电和短路。机械安全：安装和维护开关时，应采取适当的保护措施以避免机械伤害。包装运输：包装：开关采用内衬泡沫的纸箱包装，确保运输过程中的安全。运输：开关应避免剧烈振动和碰撞，防止损坏。