KP2 DANFOSS PRESSURE CONTROLLER

Danfoss KP2 pressure controller is a high-precision pressure control device for refrigeration and air conditioning systems, mainly used to protect the system from too low suction pressure or too high discharge pressure. It can also be used to start and stop the refrigeration compressor or air-cooled condenser fan, ensuring the safe and efficient operation of the system.Main featuresPressure adjustment range:Low pressure side: -0.20 bar to 5.00 bar (-2.9 psi to 72.5 psi).Pressure difference adjustment range:Low pressure side: 0.40 bar to 1.50 bar (6 psi to 21.8 psi).Reset function: automatic reset.Electrical connection:Electrical connection type: rotating cable connector.Electrical connection size: NPSM 1/2 - 14.Contact function: single pole double throw (SPDT).Contact rating:120 VAC, 16 FLA, 96 LRA.240 VAC, 8 FLA, 48 LRA.240 VDC, 12 W (0.05 A).Ambient temperature range:-25°C to 65°C (-13°F to 149°F).Maximum ambient temperature can reach 80°C (176°F), but only for a maximum of 120 minutes.Protection rating: IP30.Pressure connections:Connection type: Flare nut.Connection size: 1/4 in.

变体

KP2 丹佛斯压力控制器

类别: PRESSURE CONTROL

产品描述

1. Product Overview
Brand: Danfoss
Model: KP2
Product Alias: Dual Pressure Switch (may vary depending on certain sales or application scenarios)
Scope of application: usually applicable to the pressure range of 2~14bar (may vary depending on the actual application)

2. Function and Application
Main Use: Used in refrigeration and air conditioning systems to avoid too low suction pressure and too high exhaust pressure. At the same time, it can also be used to start and stop refrigeration compressors and fans with air-cooled condensers.
Working Principle: With a single-pole double-throw (SPDT) conversion switch, the action point is determined according to the set value of the pressure controller and the pressure at the interface.
Features:It has a very low differential value and is suitable for low-pressure control.
The vibration time is very short, which reduces wear and improves the reliability of the controller.
Manual control, electrical contact function test can be performed without the help of any tools.
The enclosure with protection level of IP30 and IP44 can be configured (some models can be configured with enclosures with higher protection levels).

3.Structure and Design
Compact structural design, saving space.
Fully welded bellows improve product durability and reliability.
High electrical and mechanical reliability ensures long-term stable operation.
Wire connection: The wire interface can be used for wires with a diameter of 6~14mm (specific specifications may vary depending on the product).

Guangzhou Baida Refrigeration Equipment Co., Ltd

看过这一点的人也被查看过

KP2 DANFOSS PRESSURE CONTROLLER

KP15 DANFOSS PRESSURE CONTROLLER

KP36 DANFOSS PRESSURE CONTROLLER

KP35 DANFOSS PRESSURE CONTROLLER

KP5 DANFOSS PRESSURE CONTROLLER

KP1 DANFOSS PRESSURE CONTROLLER

HONGSEN PRESSURE CONTROL HS-P830

压力传感器

压力传感器应用：适用于制冷系统、液压系统、气动系统、汽车、医疗设备等。主要特点：高精度测量：可精确测量气体或液体的压力，确保系统的精确控制。可靠性：采用优质材料和精密制造工艺，确保传感器能够在各种环境中稳定工作。耐用性：具有良好的耐腐蚀性和耐磨性，延长了使用寿命。易于安装：设计紧凑，易于安装，适用于各种系统。多种输出选项：提供多种输出信号选择，如模拟信号（如0-5V、0-10V、4-20mA等）和数字信号。

油差压力开关

主要特点：高精度监测：可准确监测系统内的油压差，确保系统稳定运行。可靠性：采用优质材料和精密制造工艺，确保开关能够在各种环境中稳定工作。易于安装：紧凑的设计和易于安装适用于各种系统。耐用性：具有良好的耐腐蚀性和耐磨性，延长了使用寿命。安全性：具有过载保护功能，防止因压力过大或过低而损坏系统。手动复位：具有手动复位功能，简化作和维护。

双压力开关

1、主要特点：精度高：能精确监测和控制系统中的两个不同压力点，保证系统稳定运行。可靠性：采用优质材料和精密制造工艺，确保开关能够在各种环境中稳定工作。易于安装：设计紧凑，易于安装，适用于各种系统。耐用性：具有良好的耐腐蚀性和耐磨性，延长了使用寿命。安全性：具有过载保护功能，防止因压力过大或过低而损坏系统。自动复位：具有自动复位功能，简化作和维护。安全注意事项：电气安全：确保开关的接线符合电气安全标准，以免触电和短路。机械安全：安装和维护开关时，应采取适当的保护措施以避免机械伤害。包装运输：包装：开关采用内衬泡沫的纸箱包装，确保运输过程中的安全。运输：开关应避免剧烈振动和碰撞，防止损坏。